Siemens Corp Default Password & IP Address
Find the default username, password, and IP address for Siemens Corp. Access your Siemens Corp admin panel with factory default credentials.
Ad Space
Default Credentials
18 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| 18140815 | 18140815 | 192.168.1.1 | 80 | HTTP |
| 31994 | 31994 | 192.168.1.1 | 80 | HTTP |
| admin | (no password) | 192.168.1.1 | 80 | HTTP |
| admin | pwp | 192.168.1.1 | 80 | HTTP |
| (no password) | SKY_FOX | 192.168.1.1 | 80 | HTTP |
| op | op | 192.168.1.1 | 80 | HTTP |
| op | operator | 192.168.1.1 | 80 | HTTP |
| poll | poll | 192.168.1.1 | 80 | HTTP |
| poll | tech | 192.168.1.1 | 80 | HTTP |
| su | super | 192.168.1.1 | 80 | HTTP |
| system | field | 192.168.1.1 | 80 | HTTP |
| system | system | 192.168.1.1 | 80 | HTTP |
| tech | tech | 192.168.1.1 | 80 | HTTP |
| WinCCAdmin | 2WSXcde | 192.168.1.1 | 80 | HTTP |
| WinCCConnect | 2WSXcder | 192.168.1.1 | 80 | HTTP |
| eng | engineer | 192.168.1.1 | 80 | HTTP |
| (no password) | uboot | 192.168.1.1 | 80 | HTTP |
| sysadmin | sysadmin | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Siemens Corp
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Siemens Corp?
Username: 18140815 / Password: 18140815
What is the default IP address for Siemens Corp?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space