Nortel Nortel Default Default Password & IP Address
Find the default username, password, and IP address for Nortel Nortel Default. Access your Nortel Nortel Default admin panel with factory default credentials.
Ad Space
Default Credentials
50 Credentials — Page 2/3| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| l2 | l2 | 192.168.1.1 | 80 | HTTP |
| l3 | l3 | 192.168.1.1 | 80 | HTTP |
| login | 0 | 192.168.1.1 | 80 | HTTP |
| login | 0000 | 192.168.1.1 | 80 | HTTP |
| login | 1111 | 192.168.1.1 | 80 | HTTP |
| login | 8429 | 192.168.1.1 | 80 | HTTP |
| maint | maint | 192.168.1.1 | 80 | HTTP |
| maint | ntacdmax | 192.168.1.1 | 80 | HTTP |
| Manager | (no password) | 192.168.1.1 | 80 | HTTP |
| mlusr | mlusr | 192.168.1.1 | 80 | HTTP |
| root | 3ep5w2u | 192.168.1.1 | 80 | HTTP |
| rwa | rwa | 192.168.1.1 | 80 | HTTP |
| spcl | 0 | 192.168.1.1 | 80 | HTTP |
| spcl | 0000 | 192.168.1.1 | 80 | HTTP |
| supervisor | PlsChgMe! | 192.168.1.1 | 80 | HTTP |
| supervisor | visor | 192.168.1.1 | 80 | HTTP |
| sysadmin | nortel | 192.168.1.1 | 80 | HTTP |
| system | adminpwd | 192.168.1.1 | 80 | HTTP |
| tasman | tasmannet | 192.168.1.1 | 80 | HTTP |
| trmcnfg | trmcnfg | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Nortel Nortel Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Nortel Nortel Default?
Username: l2 / Password: l2
What is the default IP address for Nortel Nortel Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space