Nortel Nortel Default Default Password & IP Address
Find the default username, password, and IP address for Nortel Nortel Default. Access your Nortel Nortel Default admin panel with factory default credentials.
Ad Space
Default Credentials
50 Credentials — Page 1/3| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| admin | admin | 192.168.1.1 | 80 | HTTP |
| admin | admin000 | 192.168.1.1 | 80 | HTTP |
| admin | (no password) | 192.168.1.1 | 80 | HTTP |
| admin | root | 192.168.1.1 | 80 | HTTP |
| admin | setup | 192.168.1.1 | 80 | HTTP |
| (no password) | 0 | 192.168.1.1 | 80 | HTTP |
| (no password) | 266344 | 192.168.1.1 | 80 | HTTP |
| (no password) | (no password) | 192.168.1.1 | 80 | HTTP |
| (no password) | l1 | 192.168.1.1 | 80 | HTTP |
| (no password) | ro | 192.168.1.1 | 80 | HTTP |
| (no password) | rw | 192.168.1.1 | 80 | HTTP |
| (no password) | rwa | 192.168.1.1 | 80 | HTTP |
| (no password) | secure | 192.168.1.1 | 80 | HTTP |
| ccrusr | ccrusr | 192.168.1.1 | 80 | HTTP |
| conferencing | admin | 192.168.1.1 | 80 | HTTP |
| debug | gubed | 192.168.1.1 | 80 | HTTP |
| distrib | distrib0 | 192.168.1.1 | 80 | HTTP |
| disttech | disttech | 192.168.1.1 | 80 | HTTP |
| disttech | etas | 192.168.1.1 | 80 | HTTP |
| 266344 | 266344 | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Nortel Nortel Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Nortel Nortel Default?
Username: admin / Password: admin
What is the default IP address for Nortel Nortel Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space