Nortel AUTH codes in LD 8 Default Password & IP Address
Find the default username, password, and IP address for Nortel AUTH codes in LD 8. Access your Nortel AUTH codes in LD 8 admin panel with factory default credentials.
Ad Space
Default Credentials
4 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| login | 0 | 192.168.1.1 | 80 | HTTP |
| login | 1111 | 192.168.1.1 | 80 | HTTP |
| login | 8429 | 192.168.1.1 | 80 | HTTP |
| spcl | 0 | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Nortel AUTH codes in LD 8
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Nortel AUTH codes in LD 8?
Username: login / Password: 0
What is the default IP address for Nortel AUTH codes in LD 8?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space