GarrettCom Magnum Switch(Web) Default Password & IP Address
Find the default username, password, and IP address for GarrettCom Magnum Switch(Web). Access your GarrettCom Magnum Switch(Web) admin panel with factory default credentials.
The default login for the GarrettCom Magnum Switch(Web) is username "manager" and password "manager". If these credentials do not work, they were changed after setup — perform a factory reset to restore the defaults.
Default Credentials
1 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| manager | manager | - | 22 | SSH |
Port Forwarding Guide
Want to open ports for your GarrettCom Magnum Switch(Web)? Set up servers, cameras, and games easily.
Factory Reset Guide
Forgot your password? Learn how to factory reset your GarrettCom Magnum Switch(Web) to restore default credentials.
How to Login to GarrettCom Magnum Switch(Web)
Follow these steps to access the GarrettCom Magnum Switch(Web) admin panel using the default credentials listed above.
- Make sure your computer or phone is connected to the GarrettCom Magnum Switch(Web) network via Wi-Fi or Ethernet cable.
- Open a web browser (Chrome, Firefox, Safari, Edge) and enter the device IP address into the address bar.
- When the login screen appears, type the default username and password from the table above.
- If the credentials work, you will be taken to the GarrettCom Magnum Switch(Web) admin dashboard. If they fail, the password may have been changed — perform a factory reset.
- For security reasons, change the default password immediately after your first successful login.
Common Login Problems & Fixes
Cannot reach the login page
Confirm you are connected to the correct network and that the IP address is correct. Try a different browser or clear your browser cache.
Default password not accepted
Someone may have changed the password. Perform a factory reset to restore the original GarrettCom Magnum Switch(Web) credentials.
Page loads but admin panel never opens
Check that you typed http:// (not https://) and that no VPN or proxy is intercepting traffic to the local IP.
Forgot the changed password
Hold the reset button on the GarrettCom Magnum Switch(Web) for 10–15 seconds to restore factory defaults, then use the table above.
Security Tips for Magnum Switch(Web)
Managed switches expose powerful controls. Change the default password on your GarrettCom Magnum Switch(Web), restrict management access to a specific VLAN, and disable unused services like Telnet in favor of SSH.
Common ports for GarrettCom Magnum Switch(Web)
SSH · Telnet · HTTP/HTTPS · SNMP · SyslogManaged switches from GarrettCom usually offer SSH or Telnet for the CLI, an HTTP/HTTPS web interface and SNMP for monitoring. Disable Telnet, restrict SNMP to read-only and harden the management VLAN.
See full port reference →About GarrettCom
GarrettCom is a manufacturer of network and IT hardware. Default credentials shipped with GarrettCom devices are publicly documented for setup and recovery purposes — that is why we maintain this database. After your first login you should always change the GarrettCom Magnum Switch(Web) password to a strong, unique value.
Is Your Network Slow or Insecure?
Older modems and routers are vulnerable to cyberattacks and throttle your internet speed. Secure and accelerate your home network with a next-gen WiFi 6 Router from Amazon's bestsellers.
How to Reset GarrettCom Magnum Switch(Web)
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in