D-Link Base Model Default Password & IP Address
Find the default username, password, and IP address for D-Link Base Model. Access your D-Link Base Model admin panel with factory default credentials.
Ad Space
Default Credentials
20 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| admin | admin | 192.168.0.1 | 80 | HTTP |
| admin | (no password) | 192.168.0.1 | 80 | HTTP |
| Admin | (no password) | 192.168.0.1 | 80 | HTTP |
| admin | password | 192.168.0.1 | 80 | HTTP |
| admin | public | 192.168.0.1 | 80 | HTTP |
| admin | year2000 | 192.168.0.1 | 80 | HTTP |
| Alphanetworks | wrgg15_di524 | 192.168.0.1 | 80 | HTTP |
| (no password) | (no password) | 192.168.0.1 | 80 | HTTP |
| (no password) | private | 192.168.0.1 | 80 | HTTP |
| (no password) | public | 192.168.0.1 | 80 | HTTP |
| D-Link | D-Link | 192.168.0.1 | 80 | HTTP |
| dont need one | admin | 192.168.0.1 | 80 | HTTP |
| root | admin | 192.168.0.1 | 80 | HTTP |
| user | (no password) | 192.168.0.1 | 80 | HTTP |
| (no password) | admin | 192.168.0.1 | 80 | HTTP |
| admin | none | 192.168.0.1 | 80 | HTTP |
| none | none | 192.168.0.1 | 80 | HTTP |
| none | private | 192.168.0.1 | 80 | HTTP |
| user | none | 192.168.0.1 | 80 | HTTP |
| admin | gvt12345 | 192.168.0.1 | 80 | HTTP |
Port Forwarding Guide
Want to open ports for your D-Link Base Model? Set up servers, cameras, and games easily.
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset D-Link Base Model
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for D-Link Base Model?
Username: admin / Password: admin
What is the default IP address for D-Link Base Model?
192.168.0.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space