Prime Prime Default Default Password & IP Address
Find the default username, password, and IP address for Prime Prime Default. Access your Prime Prime Default admin panel with factory default credentials.
Ad Space
Default Credentials
21 Credentials — Page 1/2| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| dos | dos | 192.168.1.1 | 80 | HTTP |
| fam | fam | 192.168.1.1 | 80 | HTTP |
| guest1 | guest1 | 192.168.1.1 | 80 | HTTP |
| guest | guest | 192.168.1.1 | 80 | HTTP |
| 192.168.1.1 | 80 | HTTP | ||
| maint | maint | 192.168.1.1 | 80 | HTTP |
| mfd | mfd | 192.168.1.1 | 80 | HTTP |
| primenet | primenet | 192.168.1.1 | 80 | HTTP |
| primenet | primeos | 192.168.1.1 | 80 | HTTP |
| primeos | prime | 192.168.1.1 | 80 | HTTP |
| prime | prime | 192.168.1.1 | 80 | HTTP |
| prime | primeos | 192.168.1.1 | 80 | HTTP |
| primos_cs | prime | 192.168.1.1 | 80 | HTTP |
| primos_cs | primos | 192.168.1.1 | 80 | HTTP |
| system | prime | 192.168.1.1 | 80 | HTTP |
| system | system | 192.168.1.1 | 80 | HTTP |
| tele | tele | 192.168.1.1 | 80 | HTTP |
| test | test | 192.168.1.1 | 80 | HTTP |
| netlink | netlink | 192.168.1.1 | 80 | HTTP |
| primeos | primeos | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Prime Prime Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Prime Prime Default?
Username: dos / Password: dos
What is the default IP address for Prime Prime Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space