Netgear Netgear Default Default Password & IP Address
Find the default username, password, and IP address for Netgear Netgear Default. Access your Netgear Netgear Default admin panel with factory default credentials.
Ad Space
Default Credentials
20 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| admin | 1234 | 192.168.1.1 | 80 | HTTP |
| admin | (no password) | 192.168.1.1 | 80 | HTTP |
| admin | draadloos | 192.168.1.1 | 80 | HTTP |
| admin | infrant1 | 192.168.1.1 | 80 | HTTP |
| admin | netgear1 | 192.168.1.1 | 80 | HTTP |
| admin | password | 192.168.1.1 | 80 | HTTP |
| admin | setup | 192.168.1.1 | 80 | HTTP |
| (no password) | 1234 | 192.168.1.1 | 80 | HTTP |
| (no password) | admin | 192.168.1.1 | 80 | HTTP |
| (no password) | (no password) | 192.168.1.1 | 80 | HTTP |
| (no password) | password | 192.168.1.1 | 80 | HTTP |
| (no password) | private | 192.168.1.1 | 80 | HTTP |
| (no password) | zebra | 192.168.1.1 | 80 | HTTP |
| comcast | 1234 | 192.168.1.1 | 80 | HTTP |
| cusadmin | highspeed | 192.168.1.1 | 80 | HTTP |
| Gearguy | Geardog | 192.168.1.1 | 80 | HTTP |
| super | 5777364 | 192.168.1.1 | 80 | HTTP |
| superman | 21241036 | 192.168.1.1 | 80 | HTTP |
| Admin | password | 192.168.1.1 | 80 | HTTP |
| admin | admin | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Netgear Netgear Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Netgear Netgear Default?
Username: admin / Password: 1234
What is the default IP address for Netgear Netgear Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space