Lucent Lucent Default Default Password & IP Address
Find the default username, password, and IP address for Lucent Lucent Default. Access your Lucent Lucent Default admin panel with factory default credentials.
Ad Space
Default Credentials
39 Credentials — Page 1/2| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| maint | maintpw | 192.168.1.1 | 80 | HTTP |
| admin | AitbISP4eCiG | 192.168.1.1 | 80 | HTTP |
| admin | Ascend | 192.168.1.1 | 80 | HTTP |
| (any 3 characters) | cascade | 192.168.1.1 | 80 | HTTP |
| (any 3 chars) | cascade | 192.168.1.1 | 80 | HTTP |
| bciim | bciimpw | 192.168.1.1 | 80 | HTTP |
| bcim | bcimpw | 192.168.1.1 | 80 | HTTP |
| bcms | bcmspw | 192.168.1.1 | 80 | HTTP |
| bcnas | bcnaspw | 192.168.1.1 | 80 | HTTP |
| (no password) | admin | 192.168.1.1 | 80 | HTTP |
| (no password) | cascade | 192.168.1.1 | 80 | HTTP |
| blue | bluepw | 192.168.1.1 | 80 | HTTP |
| browse | browsepw | 192.168.1.1 | 80 | HTTP |
| browse | looker | 192.168.1.1 | 80 | HTTP |
| cust | custpw | 192.168.1.1 | 80 | HTTP |
| enquiry | enquirypw | 192.168.1.1 | 80 | HTTP |
| field | support | 192.168.1.1 | 80 | HTTP |
| inads | inads | 192.168.1.1 | 80 | HTTP |
| inads | indspw | 192.168.1.1 | 80 | HTTP |
| init | initpw | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Lucent Lucent Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Lucent Lucent Default?
Username: maint / Password: maintpw
What is the default IP address for Lucent Lucent Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space