IBM IBM Default Default Password & IP Address
Find the default username, password, and IP address for IBM IBM Default. Access your IBM IBM Default admin panel with factory default credentials.
Ad Space
Default Credentials
152 Credentials — Page 1/8| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| 11111111 | 11111111 | 192.168.1.1 | 80 | HTTP |
| 22222222 | 22222222 | 192.168.1.1 | 80 | HTTP |
| admin | admin | 192.168.1.1 | 80 | HTTP |
| admin | (no password) | 192.168.1.1 | 80 | HTTP |
| ADMIN | (no password) | 192.168.1.1 | 80 | HTTP |
| Administrator | admin | 192.168.1.1 | 80 | HTTP |
| admin | password | 192.168.1.1 | 80 | HTTP |
| admin | secure | 192.168.1.1 | 80 | HTTP |
| AP2SVP | (no password) | 192.168.1.1 | 80 | HTTP |
| AUTOLOG1 | (no password) | 192.168.1.1 | 80 | HTTP |
| BATCH1 | (no password) | 192.168.1.1 | 80 | HTTP |
| BATCH | (no password) | 192.168.1.1 | 80 | HTTP |
| (no password) | admin | 192.168.1.1 | 80 | HTTP |
| (no password) | ascend | 192.168.1.1 | 80 | HTTP |
| (no password) | (no password) | 192.168.1.1 | 80 | HTTP |
| (no password) | MBIU0 | 192.168.1.1 | 80 | HTTP |
| (no password) | R1QTPS | 192.168.1.1 | 80 | HTTP |
| (no password) | sertafu | 192.168.1.1 | 80 | HTTP |
| CCC | (no password) | 192.168.1.1 | 80 | HTTP |
| $ALOC$ | (no password) | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset IBM IBM Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for IBM IBM Default?
Username: 11111111 / Password: 11111111
What is the default IP address for IBM IBM Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space