Avaya Avaya Default Default Password & IP Address
Find the default username, password, and IP address for Avaya Avaya Default. Access your Avaya Avaya Default admin panel with factory default credentials.
Ad Space
Default Credentials
19 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| admin | admin | 192.168.1.1 | 80 | HTTP |
| admin | admin123 | 192.168.1.1 | 80 | HTTP |
| admin | password | 192.168.1.1 | 80 | HTTP |
| (no password) | admin | 192.168.1.1 | 80 | HTTP |
| (no password) | (no password) | 192.168.1.1 | 80 | HTTP |
| (no password) | Craftr4 | 192.168.1.1 | 80 | HTTP |
| craft | (no password) | 192.168.1.1 | 80 | HTTP |
| craft | crftpw | 192.168.1.1 | 80 | HTTP |
| Craft | crftpw | 192.168.1.1 | 80 | HTTP |
| dadmin | dadmin01 | 192.168.1.1 | 80 | HTTP |
| diag | danger | 192.168.1.1 | 80 | HTTP |
| root | cms500 | 192.168.1.1 | 80 | HTTP |
| root | ggdaseuaimhrke | 192.168.1.1 | 80 | HTTP |
| root | root | 192.168.1.1 | 80 | HTTP |
| root | ROOT500 | 192.168.1.1 | 80 | HTTP |
| Administrator | ggdaseuaimhrke | 192.168.1.1 | 80 | HTTP |
| dadmin | dadmin | 192.168.1.1 | 80 | HTTP |
| admin | barney | 192.168.1.1 | 80 | HTTP |
| manuf | xxyyzz | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset Avaya Avaya Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for Avaya Avaya Default?
Username: admin / Password: admin
What is the default IP address for Avaya Avaya Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space