APC APC Default Default Password & IP Address
Find the default username, password, and IP address for APC APC Default. Access your APC APC Default admin panel with factory default credentials.
Ad Space
Default Credentials
10 Credentials| Username | Password | IP Address | Port | Protocol |
|---|---|---|---|---|
| (any) | TENmanUFactOryPOWER | 192.168.1.1 | 80 | HTTP |
| apc | apc | 192.168.1.1 | 80 | HTTP |
| (no password) | backdoor | 192.168.1.1 | 80 | HTTP |
| (no password) | serial number of the Share-UPS | 192.168.1.1 | 80 | HTTP |
| (no password) | TENmanUFactOryPOWER | 192.168.1.1 | 80 | HTTP |
| device | apc | 192.168.1.1 | 80 | HTTP |
| device | device | 192.168.1.1 | 80 | HTTP |
| POWERCHUTE | APC | 192.168.1.1 | 80 | HTTP |
| readonly | apc | 192.168.1.1 | 80 | HTTP |
| (no password) | serial number of the Call-UPS | 192.168.1.1 | 80 | HTTP |
Security Warning
Default passwords are publicly known. Protect your network with a VPN to encrypt your traffic and prevent unauthorized access.
How to Reset APC APC Default
If the default credentials don't work, your device may have been configured with a custom password. To restore factory defaults:
- Locate the Reset button (usually a small pinhole on the back of the device)
- Press and hold the Reset button for 10-15 seconds using a paperclip
- Wait for the device to reboot (LEDs will flash)
- After the reset, use the default credentials from the table above to log in
Frequently Asked Questions
What is the default password for APC APC Default?
Username: (any) / Password: TENmanUFactOryPOWER
What is the default IP address for APC APC Default?
192.168.1.1
How do I factory reset this device?
Locate the Reset button (usually a small pinhole on the back of the device). Press and hold the Reset button for 10-15 seconds using a paperclip. Wait for the device to reboot (LEDs will flash). After the reset, use the default credentials from the table above to log in.
Ad Space